============
Construction
============

.. include:: ../_templates/constants.rst

Mechanical design and fabrication of the RoboFlock rover. This section covers the design intent for each subsystem, the parts that make it up, the hardware that holds it together, and a step-by-step build order.

The robot is organized into six mechanical assemblies:

- **Chassis** — the structural frame and the 4080 extrusion rails it sits on


- **Drive System** — BLDC motors, brackets, couplings driving each corner


- **Wheels** — airless wheels and the printed adapters that drive them


- **Suspension** — rocker-differential linkage that couples left and right sides


- **Hull / Body** — outer enclosures, top cover, sensor mounts


- **Electronics** — printed brackets and mounts for sensors and compute

    
Each assembly has its own subsystem page; every part across all assemblies is catalogued (with files, hardware BOM, and sourcing) in the :doc:`Parts Catalog <parts_catalog>`.

.. toctree::
    :titlesonly:
    :maxdepth: 1
    :hidden:

    design_overview
    subsystems/frame_and_extrusion
    subsystems/drivetrain
    subsystems/suspension
    subsystems/hull_and_enclosures
    fabrication_guide
    parts_catalog
    hardware_catalog
    wiring_specifications